Direction Indicators

All the direction indicators on the car are used when the light alarm is set off and also as a confirmation when a button is pressed on the remote control.

It is possible to program whether the direction indicators are included in the alarm and what the flash time should be. The configuration of the light confirmation is also programmable.

The car's direction indicators are connected to the control module (pin 12 right-hand direction indicators and pin 24 left-hand direction indicators). The outputs are protected against short-circuit and are automatically disconnected from the alarm if the control module senses a short-circuit. Only the audio alarm is then maintained. The direction indicators outputs are then reconnected the next time the alarm is armed.