Scan Tool With Sda II Connector

ISAT/ISAT II SCAN TOOL WITH SDA II

1. Cover over memory module and rechargeable battery.

2. keyboard.

3. Display:
ISAT II is an updated version of the ISAT scan tool and it is fully functionally compatible. One external change is a new display with improved contrast and viewing angle. Max. display size:
- ISAT 4 lines of 20 characters.
- ISAT II, 8 lines of 30 characters.

4. The SDA II is required for all measurements except temperature and when using the Timing Service Instrument (TSI) module.

5. Connector for linking to temperature sensors.

6. Connector for linking the TSI module. The SDA II must not be connected when the TSI is used.





CONNECTOR

1. Connector, 9-pin D-Sub for communication with the SIM module, external PC or printer.

2. Connector, 15-pin D-Sub for communication with the car's 16-pin diagnostic connector (900 M94-, 9000 M96)

3. Connector, 15-pin D-Sub for communication with the car's 16-pin diagnostic connector (900 -M93, 9000 -M95)

4. Banana jacks for multimeter readings. Volts, amperes, resistance and pulse as well as PWM readings.