Manual Transmission - Shift Linkage Revision

91saab03

CATEGORY
Microfiche Discrepancy

SECTION PAGE
14 26
ISSUE CODE
10/91-0144 432


Subject: Manual Transmission Shift Linkage

Application: 9000 US Ed 7, Grid 3-B02











A completely new shift lever and linkage has been introduced in production from early in M92 production (VIN N1004567-). Please see the revised illustration along with the part number listings for complete information.





1) Carefully align the appropriate microfiche card on the matrix.


2) The black square will appear directly on the grid(s) to be marked.


3) Using a red "El Marko" permanent pen (or similar type) mark the fiche square(s).


Note:

If you use a fine tipped pen you can write the position number where the error is. This will save looking up microfiche discrepancies unnecessarily.

Unless fiche are correctly marked, the microfiche discrepancy system will be of little help in your parts department. Use the system and avoid costly ordering errors.