Idle Speed/Throttle Actuator - Electronic: Service and Repair

Idle air control valve (B234T)

Removal




1 Remove the throttle body hose.

2 Remove the clip and bend the throttle cable casing aside.

3 Remove the idle air control valve hoses from the throttle body.

4 Pull the valve off the bracket and withdraw the hoses.

5 Unplug the valve's connector.

6 Lift out the valve and remove the two hoses.


Fitting

Fit in reverse order.

Drive the car on test for adaptation of the control module.

Important: Do not tighten any of the four hose clips until the valve has been fitted and is correctly positioned.