Gear Shift Lever - Microfiche Correction
90saab08Subject: Gear shift lever
Application: 900 US M90- Edition 4, Grid 2-B02
CATEGORY Microfiche Discrepancy
SECTION PAGE
14 13
ISSUE CODE
11/90-0070 432
The information relating to the M91 gear shift shaft assembly and related components is incomplete. See below for the corrected illustration and part number listings for the affected parts.
1) Carefully align the appropriate microfiche card on the matrix above.
2) The black square will appear directly on the grid(s) to be marked.
3) Using a red "El Marko" permanent pen (or similar type) mark the fiche square(s).
Note:
If you use a fine tipped pen you can write the position number where the error is. This will save looking up microfiche discrepancies unnecessarily.
Unless fiche are correctly marked, the microfiche discrepancy system will be of little help in your parts department. Use the system and avoid costly ordering errors.