Center Console, Rear Section

TO REMOVE





1. Move the front seats to the rear limit of their fore-and-aft adjustment and apply the hand-brake. Remove the bellows piece between the front and rear center consoles.
2. Engage reverse gear and remove the ignition key.
3. Remove the gear lever gaiter.








4. Remove the two screws for the cover (top part of the console) and raise the cover so that the cables can be disconnected from the switch for the interior lighting. Insert the ignition key under the console, disengage reverse gear, and the cover can then be released from the gear lever.








5. Remove the ashtray at the rear of the console. Remove the four screws. Raise the bottom console and remove the lamp for the ignition switch lighting. The console can then be released. If the car is equipped with electric windows, disconnect the connector.
Assemble in the reverse order.