Cylinder Head Plug - Incorrect Illustration in Fiche

91saab02

CATEGORY
Microfiche Discrepancy

SECTION PAGE
14 14
ISSUE CODE
02/91-0089 211


Replaces 06/90-0009


Subject: Cylinder Head Plug

Application: M90-900, U.S. Edition 5, Grid 1-B06








The fiche has a confusing error relation to the plug shown as position 13 on the illustration. The illustration is correctly numbered and the listing has the part numbers in the correct order, but both the plug and seal are listed as position 12 in the text section. Please see chart, image for correct information.





1) Carefully align the appropriate microfiche card on the matrix.


2) The black square will appear directly on the grid(s) to be marked.


3) Using a red "El Marko" permanent pen (or similar type) mark the fiche square(s).


Note:

If you use a fine tipped pen you can write the position number where the error is. This will save looking up microfiche discrepancies unnecessarily.

Unless fiche are correctly marked, the microfiche discrepancy system will be of little help in your parts department. Use the system and avoid costly ordering errors.