Engine - Stalling/Poor Starting/Loss of Power
86saab03FILE IN S.I. Man VOL. I
SEC. B-1 PG. 19
Service Information
SUBJECT: SYSTEM FOR TESTING AND CLEANING ISSUE: 10/86-904 ELECTRONIC FUEL INJECTORS
NEW REQUIRED TOOL
APPLICATION: ALL 9000 MODELS
A new system for testing and cleaning the fuel injectors on vehicles with the 16 valve engine has been introduced. This system can be used to address complaints such as stalling, poor starting and loss of power resulting from contaminated injectors.
The Saab system features on exclusive 2.0 bar pressure relief valve and fittings, dedicated instructions and Balance Test capabilities using pressure gauge from the tank.
A complete set of injecter cleaning equipment (including on case of cleaning solution) will be sent to your dealership during early December and your account charged accordingly.
Saab Injector Cleaner/Tester P/N 83-94-264
Access Fitting 900* P/N 83-94-280
Access Fitting 9000* P/N 83-94-298
1 Case Cleaning Solution P/N 83-94-272
*Contained in 83-94-264
Instructions for the use of this equipment is contained on the pressurized container and in Service Information 10/86-901 (900) and 10/86- 902 (9000). Do not attempt to use this equipment before you have become familiar with its use.
Pricing Information (dlr. net)
83-94-264 $399.00
83-94-272 $ 50.60
83-94-280 $ 22.35
83-94-298 $ 28.20
Spare Parts Listing
The following items are available directly from the Saab-Scania Parts Division:
Description Part Number
Complete Cleaner/Tester System 83-94-264
Access Fitting 900 83-94-280
Access Fitting 9000 83-94-298
Cleaning Solution (12 can case) 83-94-272
The following items are available directly from the Kent-Moore Tool Group:
Injector Tester Test Box/Harness J 36100-2
Pressure Gauge 0-4 bar (0-60 psi) J 35957-7
Pressure Relief Valve (30 psi) J 35800-VLV
Hand Pump Assembly J 35800-PMP
Hose Assembly J 36100-25
Adapter Fitting J 35800-ADP
Adapter Fitting Seal (5 pack) J 34730-20A
Cleaning Solution (1 can) J 35800-15
Cleaning Solution (12 can case) J 35800-CSE
Check Valve J 36100-22
Push Button Valve J 36100-23
Pump Gasket J 35800-PGK
Pump Plunger Cup J 35800-PCP
Kent-Moore Tool Group Sealed Power Corporation 29784 Little Mack Roseville, MI. 48066-2298
1-800-345-2233