ACC Control - Pushbutton Replacement Labels
90saab04 CATEGORY BodySECTION PAGE
8 1
ISSUE CODE
06/90-0001 870
Subject: Replacement Labels for
ACC Pushbuttons
Application: All 9000 Models with ACC
Figure 1. ACC Generation 1 (M86-89):
Figure 2. ACC Generation 2 (M90-):
In the event that the ACC control panel pushbuttons are damaged or lift off, a set of replacement labels is available. Two different sets of labels are available; one for ACC Generation 1 (M86-89) and one for ACC Generation 2 (M90-).
Parts Required:
ACC Label Set (M86-89) P/N 40 71 106
ACC Label Set (M90-) P/N 40 74 316
The labels are supplied with a thin, clear protective film on the top surface. This film should be removed after the label has been applied to the control button.
Warranty Information:
Warranty claims for complete ACC control units will not be accepted for cases where a replacement button label is all that is required. For warranty claims, use Failure Coding 87095-15-0-01-01. Time allowance is Labor Operation No. 87095 (0.2 hour).
DCS Dealers, please add:
^ Failure Code 87095, Description = "ACC Button Labels"
^ Labor Operation No. 87095, Description = "Replace ACC Button Label"
^ Transmission Type = "B"
^ Engine Type = "9"
^ 9000 hours = ".2"
^ Begin year = "86"
^ End year = "99"