Wiring - Repairing Damaged Splash Proof Connectors
85saab02FILE IN S.I. Man. VOL. I
SEC. 3 PG. 85
Service Information
SUBJECT: REPAIRING SPLASH-PROOF CONNECTORS, M84- ISSUE: 04/85-759
To improve the quality of the car wiring, splash-proof connectors are being used to a greater extent throughout the car. However, if it becomes necessary to repair a damaged connection of this type, a terminal already fitted with a length of wire must be used. Bare terminals are not available and cannot be installed without special tools.
Male Wire Terminal P/N 78-74-506
Female Wire Terminal P/N 78-74-498
These terminals come with a preinstalled length of wire (7.5", 200 mm) which must be connected or spliced to the existing cable. These cables have a conductor area of 1.5 sq. mm and can be used in all areas of the car. If the terminals are connected to a system with heavier conductors the wire should be shortened as much as possible.