Wiper Blade Element Replacement

REMOVAL
1. Lift wiper arm to raise blade off glass.

Wiper Blade And Element:

Remove Blade From Arm:

2. Remove blade assembly from arm by pushing release tab under arm tip and slide blade away from arm tip. Gently place wiper arm tip on glass surface.
3. To remove wiping element from blade assembly:

Windshield Wiper Blade Element:

- Pull stopper, of the rubber element, out of the end claw together with vertebrae (metal rails).
- Remove wiper element and vertebrae by sliding them out of the claws.

INSTALLATION
1. Slide the new element into the blade.
2. Be sure the retaining tab is seated in the blade.
Check that the element and vertebra is through all claws and the final claw is locked in the stopper. The right blade, the vertebra is curved to match the shape of the windshield. Install the vertebra with the curve down.