Hazard Warning Switch: Description and Operation

HAZARD SWITCH
The Hazard Warning Switch is not repairable. If defective, the entire Multi-Function Switch must be replaced (Refer to LAMPS/LIGHTING - EXTERIOR/MULTI-FUNCTION SWITCH - REMOVAL).

Multi-Function Switch:

MULTI-FUNCTION SWITCH
The multi-function switch assembly is mounted to the left side of the steering column. This switch contains circuitry for the following functions:
- Turn signals
- Hazard warning
- Headlamp beam selection
- Headlamp optical horn
- Windshield wipers
- Windshield washers.

The information addresses only the switch functions for the turn signal and hazard warning circuits. However, the multi-function switch cannot be repaired. If any function of the switch is faulty, the entire switch assembly must be replaced.