Tail/Brake/Turn Signal Lamp Bulb Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig. 22 Access Door:

2. Remove screws attaching the tail/stop turn signal lamp access door to the body.
3. Remove the access door.
4. Rotate bulb socket counterclockwise one quarter turn.
5. Pull bulb socket from the tail/stop/side marker/turn signal lamp.
6. Pull bulb from the bulb socket.

INSTALLATION
1. Push bulb into the bulb socket.
2. Push bulb socket into back of tail/stop/turn signal lamp.
3. Rotate bulb socket clockwise one quarter turn.
4. Position the lamp access door on the body.
5. Install screws attaching lamp access door to the body.
6. Connect the battery negative cable.
7. Verify proper operation.