Front / Center / Side / Rear - Rail Weatherstrip

FRONT/CENTER/SIDE/REAR RAIL WEATHERSTRIP

REMOVAL

1. Open doors.
2. Unlatch convertible top header and raise off of windshield frame.
3. Raise #4 bow and top rear.
4. Open decklid.

NOTE: Mark location of weatherstrips to help with installation.

5. Remove retaining clips.
6. Peel weatherstrip from retainer.

INSTALLATION

NOTE: There are 2 retaining clips per weatherstrip. Ensure that the weatherstrip is properly engaged during installation.

1. Position weatherstrip to retainer and push into place using Trim Stick.
2. Close deck lid and re-latch rear of top and windshield frame header.
3. Slide weatherstrips fore/aft to adjust compression of weatherstrip joints.