Bulkhead Carpet

BULKHEAD CARPET

REMOVAL

1. Lower convertible top and open deck lid.
2. Slide seats forward.
3. Remove quarter trim panels.
4. Remove speaker box and trim cover.
5. Remove screws attaching CD changer to head panel behind passenger seat.
6. Disconnect CD changer wire connector under carpet.
7. Remove push in fasteners on top of the bulk-head.
8. Remove bulkhead carpet from vehicle.

INSTALLATION

1. Position bulkhead carpet in vehicle.
2. Install push in fasteners on top of the bulkhead.
3. Connect CD changer wire connector under carpet.
4. Install screws attaching CD changer to bulkhead panel.

NOTE: Carpet must be installed behind floor console rear tabs.

5. Install speaker box.
6. Install quarter trim panels.