Hood Side Panel

HOOD SIDE PANEL

REMOVAL

1. Open hood and support.
2. Mark position of hood side panel bolts to ease in installation.

Fig. 2:

3. Remove bolts on top of the hood side panel (Fig. 2).
4. Lift hood side panel to disengage from front quarter panel.
5. Disconnect side turn signal bulb socket.
6. Remove panel from vehicle.

INSTALLATION

1. Position hood side panel to vehicle.
2. Connect side turn signal bulb socket.
3. Engage metal clips on bottom of the panel.
4. Install bolts on top of the hood side panel and tighten to 3 N.m (30 in.lbs.) torque.
5. Adjust as necessary.