Inoperative Mode Door

Tests 1 - 4:

Tests 5 - 9:

Tests 10 - 15:

SYMPTOM
INOPERATIVE MODE DOOR

TEST NOTE
This symptom is diagnosed using the test HVAC MODE DOOR INOPERATIVE.

POSSIBLE CAUSES
- Check for an air flow change
- Fused ignition switch output circuit open
- Open ground circuit at motor
- A/C mode door driver (A) circuit shorted to ground
- A/C mode door driver (B) circuit shorted to ground
- A/C mode door driver (A) circuit open
- A/C mode door driver (B) circuit open
- Check the mode doors for a binding condition
- Mode door actuator
- Open ground circuit
- Open A/C mode switch MUX circuit
- A/C heater control
- Body control module - open A/C mode switch MUX circuit
- Body control module