Solenoid/Pressure Switch Assembly

SOLENOID - TCC

Removal
1. Remove valve body from transaxle.





2. Remove three (3) torque converter clutch solenoid-to-valve body screws (Fig. 221).
3. Remove torque converter clutch solenoid (Fig. 221). Note orientation of plug and spring.

Installation
1. Install plug and spring as shown in (Fig. 221).
2. Install torque converter clutch solenoid to valve body (Fig. 221) and torque screws to 5 Nm (45 inch lbs.).
3. Install valve body to transaxle.