Disassembly Service Points

Removal Of Magnetic Switch:

REMOVAL OF MAGNETIC SWITCH
Disconnect field coil wire from "M" terminal of magnetic switch.

Removal Of Brush Holder Assembly:

REMOVAL OF BRUSH HOLDER ASSEMBLY
Slide the two brushes from brush holder by prying retaining springs back.


REMOVAL OF SNAP RING & STOP RING

Removal Of Snap Ring / Stop Ring:

a. Press stop ring off snap ring with a suitable socket.

Removal Of Snap Ring & Stop Ring:

b. Remove snap ring with snap ring pliers and then remove stop ring and overrunning clutch.