Completion Reporting and Reimbursement

Claims for vehicles which have been serviced must be submitted on the DIAL

System. Claims submitted will be used by Chrysler to record recall service completions and provide dealer payments.

Use the following labor operation number and time allowance:

Labor Operation Time
Number Allowance

Replace primary air bleed jet, 14469182 0.7 Hour
install choke adjustment shim and inspect/replace secondary air filter.

Add the cost of a new secondary air filter (if used) plus applicable dealer allowance to your claim.

Parts Return

Removed secondary air filters must be returned to the Warranty Material Return Center.

Note: See Warranty Policy and Procedure Manual, Chapter 6, Subsection H, for complete recall claim processing and material return instructions.

Vehicle Not Available

If a car is not available for this service for a known reason, let us know by filling out the pre-addressed Vehicle Disposition Form portion of the Owner Recall Notification Form or describe the reason on a postcard and mail to:

Chrysler Corporation 416-15-19 Recall Coordination P.O. Box 1919 Detroit, Michigan 48231-9986

Following the above procedures will expedite the processing of your claim.

If you have any questions or need assistance in completing this action, please contact your Zone Service Office.