13 62 618 Replacing the Temperature Sensor and Charging Pressure Sensor

13 62 618 Replacing the temperature sensor and charging pressure sensor (N14, N18)







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







Unlock connector (1) and remove.
Release screw and detach sensor (2) from charge air duct.

Installation note:
- Check sealing ring for damage, replace if necessary.
- When installing, coat sealing ring with suitable lubricant.
- Tightening torque 13 62 6AZ.







Check stored fault messages.
Delete fault memory.