61 62 100 Adjusting Jet Nozzle For Rear Window Washing System

61 62 100 Adjusting Jet Nozzle For Rear Window Washing System







NOTE: Rear window wiper must be in rest position.

Mark contact point (1) with adhesive tape (A = 55 mm / B = 490 mm).
Actuate rear window washer unit.
Jet spray must strike marking.
If necessary, adjust spray nozzle (3).

IMPORTANT: Do not insert any pointed objects into spray nozzle (3) (risk of damage).

Open protective cap (2).
Adjust spray nozzle (3) with a suitable tool until jet spray strikes marking.
If necessary, remove adhesive residue from rear window.
Fill up with washer fluid.