Replacing Push Rod (Support) For Stabilizer

Removing And Installing Or Replacing Push Rod (Support) For Stabilizer





Release stabilizer link (1) from stabilizer bar.

Install hint:
Replace self-locking nut.
Front anti-roll bar link to anti-roll bar
M10 x 1.5 56 Nm
Note: use only once.





Derivatives up to 03/2002
Remove stabilizer link from spring lower plate. Hold link with spanner (1) and remove nut (2).
Front anti-roll bar to lower spring pan
M10 x 1.5 56 Nm
Note: Use only once.





Derivatives from 03/2002
Release nut (1) - grip with open end wrench and detach stabilizer link.
Replace self-locking nut.
Front anti-roll bar link to anti-roll bar
M10 x 1.5 56 Nm
Note: use only once.