Front Door Window Motor: Service and Repair

REMOVAL
1. Position the front door window glass in the full up position and secure with tape.
2. Disconnect the battery.
3. Remove the front door trim panel.







4. Remove the screws and the speaker.
^ Disconnect the electrical connector.







5. Disconnect the electrical connector.







6. Remove the front door window regulator motor screws.







7. Remove the window regulator motor.
^ Partially separate the window motor from the regulator, then press the release tab on the regulator and remove the window regulator motor.

NOTE: The window regulator motor and regulator assembly is shown removed from the vehicle.

INSTALLATION
1. To install, reverse the removal procedure.