| Crankshaft | Main Bearing Journal | Diameter | | 25.190 - 25.198 Inch (in) |
| | Out-Of-Round | Limit | 0.0003 Inch (in) |
| | Taper | Total Limit | 0.0006 Inch (in) |
| | | per 1 inch | 0.0003 Inch (in) |
| | Journal Runout | Limit | 0.002 Inch (in) |
| | Surface Finish | RMS | 10.0 Micro-Inches (micro-in) |
| Thrust Bearing Journal | Length | | 1.0148-1.067 inch |
| Connecting Rod Journal | Diameter | | 2.1253-2.1261 Inch (in) |
| | Out-Of-Round | Limit | 0.0003 Inch (in) |
| | | Maximum Total | 0.0006 Inch (in) |
| | Taper | Limit Per Inch | 0.0003 |
| | Surface Finish | (RMS) Limit | 0.25 Micro-Meters (micro-m) |
| Main Bearing Thrust Face | Surface Finish | RMS | 0.4 Micro-Meters (micro-m) |
| | Runout | Limit | 0.001 inch |
| End Play | | | 0.004-0.008 Inch (in) |
| Connecting Rod Bearings | Clearance To Crankshaft | Desired | 0.001-0.0014 Inch (in) |
| | | Allowable | 0.00086-0.0027 Inch (in) |
| | Bearing Wall Thickness | Standard | 0.0612-0.0618 Inch (in) |
| Main Bearings | Clearance To Crankshaft | Desired | 0.001-0.0014 Inch (in) |
| | | Allowable | 0.0005-0.0023 Inch (in) |
| Bearing Wall Thickness | | 1st and 2nd | 0.0962-0.0976 Inch (in) |
| | | 3rd and Rear | 0.0980-0.0955 Inch (in) |