AN31.11-P-8080-06EC Retrofit Release Lever

AN31.11-P-8080-06EC Retrofit Release Lever







1. Unscrew nut (24).
2. Install bracket (16) in left of trunk as shown and tighten with nuts (21 and 24).







3. Remove locking clips (19) from the lock of the trailer hitch (A63)
4. Insert cable (17) into the bushing of the lock of the trailer hitch (A63) and turn the hand wheel until the groove (17.1) on the cable (17) aligns with the groove (18) of the lock of the trailer hitch (A63).
5. Reinstall locking clips (19).
6. Plug black 6-pin coupling from the wiring harness of the trailer hitch (20) into the lock of the trailer hitch (A63).







7. Clip in lock of trailer hitch (A63) at bracket (16).