AH01.45-P-0001-01SX Notes on Application of Sealant to Oil Pan

AH01.45-P-0001-01SX Notes On Application Of Sealant To Oil Pan








Oil pan with front sump

The line (A) identifies the sealant run.

The sealing surface must be cleaned.
The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm (±0.5 mm).
The sealant must be applied within 10 min.
The sealant bead must not be spread. Only the sealant listed in the Repair Products may be used.





Oil pan with rear sump





Oil pan with middle sump