AR33.15-P-0161-01V Rubber Bushing In Transverse Link, Removal and Installation

AR33.15-P-0161-01V Rubber bushing in transverse link, removal and installation

Special Tools:

Workshop Equipment:

Component Identification:

Pressing out
1 Mark relative positions of rubber bushing (29d) and transverse link (29).
2 Press out rubber mount (29d) using extraction and insertion tool.

220 589 06 43 01 and use 220 589 06 43 02 from the extraction and insertion tool.

Component Identification:

Pressing in
3 Make corresponding alignment mark on new rubber bushing (29d).
4 Fit chamfer of rubber mount (29d) to chamfer on cross strut (29).

The slot in the rubber bushing (29d) must align with the longitudinal axis of the transverse link (29).

5 Press in rubber mount (29d) as far as the stop.

When pressing in ensure that the rubber mount (29d) is not twisted.