Calling Up the Correct Service Item

Service Item Menu

To determine the actual "Service Items" required (Serv. 1-20 and additional work), you must call up the "Service Menu" in the multifunction display.

Calling up the service item menu

- Turn key in ignition switch to position 1.
- Press the system selection button (S110s3) repeatedly until the odometer reading or temperature is displayed in the multifunction display (A1p13).





- Briefly press the instrument illumination rheostat and reset button (A1r1) 3 times.
An acoustic signal can be heard and the voltage is shown in the multifunction display.

Service Menu Positions Screen:

- Press right scroll forward/back button (S110s1) on the multifunction steering wheel until the "Service Menu" appears in the multifunction display (A1p13).
- Press the left + and - button, adjustment of specific functions and volume control (S111s1) repeatedly until "Positions" is highlighted.
- Confirm selection with the right system selection button (S110s3).
Read off and note service items to be performed.
- Press left + and - buttons, adjustment of specific functions and volume control (S111s1) repeatedly to display and note down all the service items to be performed.
- Press left system select button (S110s3) on the multifunction steering wheel repeatedly until the odometer reading or temperature is displayed in the multifunction display (A1p13).
- Turn key in ignition switch to position 0.