91-060 Remove/Install Covering on Side of Backrest Frame

91-060 Removing And Installing Covering On Side Of Backrest Frame










Installation note
When installing, insert covering (6) with insert clip at bottom on backrest bearing bolt, then insert at top into cover on head restraint brace.







Removal, installation
1 Unscrew screws on handle recess (2 each) and remove handle recess.







2 Unscrew screws on backrest frame (4 each) and remove.







3 Unscrew screws in area of backrest lock (2 each).
4 Remove covering from backrest frame toward rear and upward.







5 Insert covering with insert clip at bottom on backrest bearing bolts, then at top into cover on head restraint brace (arrow).
6 Continue to reinstall in opposite order.