Infrared Remote Control Module (N54)

Cover below instrument panel on right
Remove, install.

Nut (1)
Unscrew, screw on.

Electric connector
Disconnect, reconnect.

NOTE The 12-pin connector (a) is equipped with an aid for connecting and disconnecting. To disconnect press the catch and swivel slide the strap away. The 2-pin connector (b) is secured with a retainer. To disconnect press the catch and slide the retainer to the side.

Control module (N54)
Remove, install.

NOTE: When replacing the control module or the remote control key always indicate the locking system number, because the two parts are matched to one another.