AR82.70-P-0003I Remove/Install Voice Control System Control Unit

Removing and installing voice control system control module

Shown On Model 220:

1 Connect quiescent current retention unit
- See "Commercially Available Tools" below.

2 Disconnect ground cable of battery

3.1 Remove rear seat cushion
3.2 Remove bucket seat
- Model 220 with code 401, right side only.
4 Remove seat adjustment device on rear sea
- Model 220 with code 401, right side only.
5 Unscrew screws (1) and nuts (2) and remove assembly plate (3) from vehicle floor
6 Disconnect connector (4) from voice control system control module (A35/11)
7 Disconnect D2B connection (5) from voice control system control module (A35/11)

CAUTION: Do not bend D2B wires.

NOTE: If the voice control system control module (A35/11) should be removed for a longer period of time, install adapter for closing the D2B ring.

8 Unscrew screws (6)
9 Install in the reverse order.

Commercially Available Tools

Commercially Available Tools: