Quarter Window Regulator: Service and Repair

AR67.39-P-4150KA Remove/Install Power Window Motor For Rear Side Window

DANGER: Risk of injury due to hands being crushed when window is not secured
- Secure window against falling down

1 Remove rear passenger compartment side trim panel
2 Remove sealing rails (7)
3 Unscrew nuts (1) from power window on rear shaft strut (2)

NOTE: Mark position of screw with felt pen to avoid unnecessary adjustment work

4 Unscrew screws (3)
- Remove rear shaft strut (2)
5 Unscrew nut (4) from adjustment screw (5)

NOTE: Screw in adjustment screw (5) to stop

6 Unscrew nuts (6) for adjustment screws from bottom retaining bracket
7 Remove rear power window with rear side window upward

NOTE: Installation When installing window avoid damaging paint

8 Install in the reverse order

NOTE: Installation Adjust rear side window

Front door side window to soft top: Dimension "Z": 9.0 ± 1.0
Front door side window to rear side window: Dimension "N": 8.0 ± 2.0

See "Special Tools" given below.

Special Tools

Quarter Window Regulator: Service and Repair

Feeler Gage, P/N # 129 589 03 21 00: