AR77.30-P-3562KA Remove/Install Soft Top Bow Lock

AR77.30-P-3562KA Remove/Install Soft Top Bow Lock







1 Open soft top

NOTE: Leave soft top compartment cover open

CAUTION: Protect soft top in soft top compartment against oil dripping out

2 Remove inner paneling from soft top compartment cover
3 Disconnect soft top bow locked limit switch connector (S84/16x1)
4 Unscrew sheet metal screws (1)

Screw for soft top bow lock on soft top compartment cover - 8 N.m

5 Press retainer (2) out of hydraulic lines (3) and pull out hydraulic lines (3)

CAUTION: Immediately plug hydraulic lines with plugs , plug connections on hydraulic cylinder with blind plugs.

Plug No. -07, Blind Plug No. -01 : See "Special Tools" given below.

6 Remove soft top bow lock
7 Install in the reverse order
8 Bleed hydraulic system
9 Check oil level of hydraulic system

NOTE: if necessary add oil through oil filler screw.

Oil Filler Plug: Oil filler screw on hydraulic unit supply reservoir - 2 N.m

10 Check for proper function and leakage

Special Tools

Set Of Plugs, P/N # 129 589 00 91 00: