Starter Motor: Service and Repair

Remove Starter, Install






DANGER:
- Risk of explosion from hydrogen gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injure to eyes and skin suffering caustic burns from battery electrolyte or from contact with damaged lead acid batteries.
- No fire, sparks, open flames or smoking.
- Wear acid-resistant gloves, clothing and glasses. Pour battery electrolyte only into suitable and appropriately marked containers.

1 Disconnect ground line of battery
2 Detach lower engine compartment paneling
3 Remove right engine mount, install
4 Disconnect electric cables (1/2)

Nut of connection of circuit 30 - 14 N.m
Nut of connection circuit 50 - 6 N.m

5 Unscrew bolts (3)

Bolt of starter to crankcase - 42 N.m

6 Take starter (M1) down and out
7 Install in the reverse order
8 Carry out function check
9 Render electrical system operational

NOTE: Perform basic programming