Final Assembly and Function Test

I. Final Assembly and Function Test

1. Replace the trunk mat and removed panels.

2. Program the telephone per S-S1-82.70/124, StarTAC Portable Telephone Programming.

3. Verify proper CD changer, telephone, and Voice Activation System (as applicable to equipment installed) operation per the following checklist:

CD Changer

^ Disk 1-6 load and unload properly

^ Magazine load and eject operate smoothly

^ CD sliding door opens/closes properly

^ Audio is clear and crisp

^ First and last track on selected CD can be accessed

Telephone

^ Handset dialing is functioning

^ Head unit dialing is functioning

^ Handset incoming/outgoing call audio is clear

^ Hands-free incoming/outgoing audio is clear

^ Automatic memory download is functioning (may be necessary to store a test number in the telephone handset for this feature to operate). After automatic download, stored numbers should be available for dialing from the head unit.

^ Verify that the telephone mode is available in the ICM

^ Verify operation of the steering wheel controls

Voice Recognition

^ Verify that the VRM can be controlled by the PTT lever on the column

^ Verify that the spoken instructions are functioning with a high recognition rate

^ Verify that the VRM can control the telephone