Cranking Engine Using A Remote Starter Button

- Switch ignition off.
- Detach cover over engine component compartment.
- Unplug connector of plug connection (X22) (circuit 50).
- Connect clamp of cable (01) to pin 1 of plug connection (X22) circuit 50.
- Connect cable (01) to cable (02) of compression recorder special tool 001 589 77 21 00.
- Open cover of terminal block (X12/3).
- Connect clamp (03) of compression recorder 001 589 76 2100 to terminal block (X12/3) circuit 30.
- With transmission in Neutral and parking brake applied crank engine in idle speed position by pushing contact handle (arrow) on compression tester.

CAUTION: Do not crank engine using ignition starter switch.