Remove/Install Fuse and Relay Box As of 6/1/97

202 as of 6/1/97
208 all

Illustrated On Model 208:

Removal, installation
1 Disconnect ground lead from battery
2 Remove fuse box cover (1)
3 Unscrew screws (2)
4 Remove relay box cover (3)


NOTE: Check gasket (10) for damage


5 Unscrew screw (4)
6 Remove fuse blocks (A-E)


CAUTION: Carefully remove carriers for fuse blocks (5) upward


7 Disconnect leads from fuse box or fuse blocks
Refer to Special Tool below


CAUTION: Disconnect leads only when replacing entire fuse and relay box. Tie disconnected leads from individual fuse boxes or blocks together and mark to prevent mix-ups.


Connect leads from fuse boxes or fuse blocks.

Assignments and wire connections for fuse blocks
- Model 202 as of 1.6.97
- Model 208

8 Remove relay holder carrier (7) together with relay holder (6)


NOTE: The relay holder is pivot-mounted on the relay holder carrier


9 Unclip connectors on bottom of relay holder (6)
10 Pull off all relays


NOTE: Only when changing relay holder. Relay holder assignment


11 Remove paneling in footwell (driver-side)
12 Unscrew nuts (8)
13 Remove fuse and relay box (F1)


NOTE: Check gasket (9) for damage


14 Reinstall in opposite order