| Test values for Connecting Rods | Engine 120 |
| Distance from middle of conrod bearing bore up to conrod bush bore | 153.095-154.05 mm |
| Width of conrod at conrod bearing bore | 21.948-22.000 mm |
| Conrod bearing shell basic bore | 51.600-51.619 mm |
| Permissible out of roundness and conicity of basic bore | 0.02 mm |
| Permissible difference of axial parallelism of conrod bearing bore to conrod bush bore | 0.07 mm |
| Permissible difference in weigtht of complete conrod of an engine | 4 g |
| Conrod bush inner diameter | 22.007-22.013 mm |
| Conrod bush basic bore | 24.500-24.521 mm |
| Piston pin play in conrod bush | 0.013-0.018 mm |
| Peak to valley height of conrod bush on inside | 0.005 mm |
| Permissible twist of conrod bearing bore to conrod bush bore | 0.15 mm |