Injection System (LH)

Component Locations:

Fig. # 1

Component Locations:

Fig. # 2

Component Locations:

Fig. # 3

Component Locations:

Fig. # 4

Component Locations:

Fig. # 5

Component Locations:

Fig. # 6

COMPONENTS:

Air injection pump switchover valve Y32, see Fig. # 6.

Air injection relay K17, see Fig. # 4.

Air mass sensor with hot wire B2/3 and B2/4, see Fig. # 3.

Base module N16/1, see Fig. # 1.

Camshaft adjustment solenoids Y49/1 and Y49/2, see Fig. # 3.

Camshaft position sensors L5/2 and L5/3, see fig. # 3

Crankshaft position sensors L5/4 and L5/5, see fig. # 3

"CHECK ENGINE" warning lamp A1e26, see Fig. # 5.

Coolant temperature sensor B11/9 and B11/10, see Fig. # 3.

Data link connector X11/4, see Fig. # 1.

Diagnostic module N59, see Fig. # 1.

Diagnostic module test connector X11/21, see Fig. # 1.

EGR switchover valve Y27/2 and Y27/3, see Fig. # 3.

Electronic accelerator (EA/CC/ISC) control module N4/1, see Fig. # 1.

EVAP purge line (to charcoal canister), see Fig. # 2

Fuel injectors Y63 and Y64, see Fig. # 3.

Fuel injection (LH) control module N3/2 and N3/3, see Fig. # 1.

Fuel pump relay K27/1 and K27/2, see Fig. # 1.

Intake air temperature sensor B17/5 and B17/6, see Fig. # 2.

Oxygen sensors G3/3 and G3/4, see Fig. # 4.

Purge control valve Y58/2 and Y58/3, see Fig. # 2.

Upshift delay switchover valve Y3/3, see Fig. # 4.