Speed-Sensitive Power Steering (SPS) (DTC Memory [11])
Speed-Sensitive Power Steering (SPS)
Models 140
Test Preparation for DTC Readout
1. Connect impulse counter scan tool or Hand-Held Tester to data link connector (X11/4) as shown in section 0.
Note: Connect yellow wire from impulse counter scan tool as follows: SPS control module (N49/1) socket 12 Base module (N16/1) socket 8
2. Ignition: ON.
3. Read DTC memory of SPS control module (N49/1), and base module (N16/1).
Special Tools:
Equipment:
Model 140.0 (LH-SFI uo to 05/93), 140.1 (diesel)
DTC 1/- To 11/011:
Model 140.0 (HFM-SFI and LH-SFI as of 06/93)
