Cylinder Bore

Cylinder Bore Diameter
Engine Series 104.99
Engine Size 3.2L (195 cu in)
Tolerance Group [1] A, X, B
Cylinder Bore 89.900 - 89.918 mm (3.5394-3.5401 in)

Cylinder Bore Deviation
Out of Round
New 0.0 - 0.014 mm (0.0 - 0.0006 in)
Wear Limit 0.05 mm (0.0019 in)

Deviation at Upper reversal point of Piston Ring
Repair Limit 0.10 mm (0.0039 in)

Cylinder Chamfer
Angle 60 °
Depth 0.5 mm (0.020 in)

Honing Angle 50 ° ± 10 °

[1] -- Tolerance group letters are punched into piston crown & stamped into cylinder crankcase parting surface.