With Diagnostic Socket (X11)

Test Equipment:

NOTE: Set engine analyzer to 4 cylinder position. Without the diagnostic adaptor tool only one ignition circuit can be checked at a time.

A Throttle linkage
R4 Spark plug (cylinder 1)
S5/5 Left high-voltage distributor
S5/6 Right high-voltage distributor
T1/1 Ignition coil 1 (right cylinder bank)
T1/2 Ignition coil 2 (left cylinder bank)
X11 Diagnostic socket (9-pole)
X11/4 Data link connector, (DTC readout, 38-pole)
012 On-off ratio tester
013 Impulse counter scan tool
014 Exhaust vent hose
018 Oil thermometer
030 Engine analyzer with oscilloscope
042 Pressure gauge
061 Trigger clamp (on cylinder 1)
062 Kilovolt clamp (on ignition coil, T1/1 or T1/2)
075 Impulse counter scan tool adapter

`