Starter Motor: Service and Repair

201 SERIES W/GASOLINE ENGINE

1. Disconnect battery ground cable.
2. Remove air cleaner assembly, then the intake manifold support.
3. Disconnect spring between throttle valve housing and intake manifold support.
4. On models equipped with cruise control, remove actuator from stud to allow removal of the starter.
5. On all models, remove starter support bracket from starter and engine block.
6. Remove starter-to-transmission attaching bolts, then separate drag link from pitman arm.
7. Remove battery positive cable and disconnect starter wiring from junction box.
8. Turn steering wheel fully to the right and unfasten starter.
9. Disconnect wiring from starter and remove starter from vehicle.
10. Reverse procedure to install.