Valve Cover: Service and Repair

REMOVAL
- Remove air filter assemble.
- Ignition cable (16), unplug at distributor cap.
- Ignition distributor cap (15), unbolt at distributor.
- Spark plug connector (d), detach from spark plugs.
- Vent line (e), detach.
- Holder (b), unbolt (if equipped with automatic transmission).
- Cap nut (96) or hexagon nut (c), unbolt.
^ Tightening Torque: 15 Nm.
- Cylinder head cover (81), remove with ignition cables.

INSTALLATION
- Install in reverse order of removal.

Installation Note:
- Gasket (93) check, replace if necessary.