Fan Clutch: Service and Repair

Solenoid removal / installation

Preceeding Work: Remove V-Belt.






Unscrew belt pulley (72) (step 2).
Tightening torque
Hex socket bolts 10 Nm
Hex Torx© bolt 15 Nm

Detach cable connector (68a) from solenoid body, plug in (step 3).

Unscrew Solenoid body (68) pay attention to installed position.
Tightening torque 10 Nm (reference value, step 4).

Note: The carrier (68b) for the solenoid body is bonded to the coolant pump, do not pull off. Stick on loose carriers with adhesive 001 989 47 20.









1. Remove and install V-belt

2. Unscrew belt pulley for coolant pump
Tightening torques:
Hex. socket bolts 10 Nm
Hex. Torx© bolts 15 Nm

3. Detach cable connector (68a) from solenoid body.

4. Unscrew solenoid body (68), screw on, pay attention to installed position
Tightening torque 10 Nm (reference value).

Note: The carrier for the solenoid body is bonded to the coolant pump housing. Attach loose carrier with adhesive 001 989 47 20.