Balancing Balance Plate Statically

NOTE: The state of balance of the old balancing disc must be transferred to the new balancing disc.


Whenever possible, a broken balancing disc should be glued together with all its parts and should be statically balanced together with the new balancing disc.

Static balancing







1 Place new balancing disc on balancing mandrel offset by 180° in relation to old balancing disc.
2 Let balancing mandrel with both balancing discs swing to a stop on rotating fixture.







3 Drill into new balancing disc until the discs will come to a stop on rotating fixture in any position without swinging back and forth.

Pay attention to location of balancing holes (Fig.).
Hole depth max. 15 mm.