| Center of Big End Bearing Bore to Center of Small End Bushing Bore | | 148.95 - 149.06 |
| Width of Connecting Rod at Big End Bearing Bore | | 31.84 - 31.88 |
| Width of Connecting Rod at Small End Bushing Bore | | 27.90 - 28.10 mm |
| Basic Bore for Big End Shell Bearings | | 55.60 - 55.62 |
| Basic Bore for Small End Bushing | Normal Size | 31.000 - 31.025 |
| Repair Size | 31.500 - 31.525 |
| Small End Bushing Outer Diameter | Normal Size | 31.060 - 31.100 |
| Repair Size | 31.560 - 31.600 |
| Small End Bushing Inner Diameter | | 28.018 -28.024 |
| Peak to Valley Height of Small End Bushing Inside | | 0.004 mm |
| Permissible Twist of Big End Bearing Bore to Small End Bushing Bore, Relative to Length of 100 mm | | 0.1 |
| Permissible Parallel Misalignment of Big End Bearing Bore Axis to Small End Bushing Bore Axis, Relative to Length of 100 mm | | 0.045 |
| Permissible Difference in Weight Between Any Two Con-Rod Assemblies within One Engine | | 5 |