Down Switch Inspection

DOWN SWITCH INSPECTION [FS5A-EL]

CAUTION:
- Do not allow foreign material or water to penetrate the connector. Otherwise, it could cause poor contact and corrosion.

1. Disconnect the selector lever component connector.
a. Remove the battery cover. Removal and Replacement

b. Disconnect the negative battery cable.

c. Remove the center console box. Center Console Box Removal/Installation

d. Remove the console panel. Console Panel Removal/Installation

e. Remove the center console. Center Console Removal/Installation

f. Remove the selector lever knob.






g. Remove the shift panel. Shift Panel Removal/Installation

h. Remove the side wall. Side Wall Removal/Installation

i. Remove the front console. Front Console Removal/Installation

j. Disconnect the selector lever component connector.






2. Measure the continuity between selector lever component terminals C and H.






- If there is any malfunction, replace the selector lever component. Automatic Transaxle Shift Mechanism Removal/Installation

Down switch continuity