Power Window Subswitch Inspection

POWER WINDOW SUBSWITCH INSPECTION

Passenger Side

1. Disconnect the negative battery cable.

2. Remove the passenger-side inner garnish. Inner Garnish Removal/Installation

3. Remove the passenger-side front door trim. Front Door Trim Removal/Installation

4. Remove the passenger-side power window subswitch. Overhaul

5. Connect the passenger-side power window subswitch connector.

6. Connect the negative battery cable.

7. Verify that the voltages of each of the terminals are as indicated in the terminal voltage table.

- If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.

- If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the passenger-side power window subswitch. Power Window Subswitch Removal/Installation

Terminal Voltage Table (Reference)









Rear Side

1. Disconnect the negative battery cable.

2. Remove the rear side trim. Rear Side Trim Removal/Installation

3. Remove the rear power window subswitch. Rear Side Trim Removal/Installation

4. Connect the rear power window subswitch connector.

5. Connect the negative battery cable.

6. Verify that the voltages of each of the terminals are as indicated in the terminal voltage table.

- If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.

- If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the rear power window subswitch. Power Window Subswitch Removal/Installation

Terminal Voltage Table (Reference)